Using Tenoning Machines to Make Mortise and Tenon Joints

Years ago, mortise and tenon joint parts were formed by side – an arduous process that often produced imprecise joints. Today, woodworkers perform the tenoning process with machinery that produces perfect joints in five styles. If your current woodworking machines cannot produce quality tenons, below are five joint styles you could make with the aid of a tenoning machine: mortising machine reviews

Stopped Style

A stopped joint (a. p. a. blind joints) animal skins the joint section, which makes it appealing for woodwork where obvious articulations are undesirable, such as fine furniture. To conceal the joint section, the joint is constructed so the tenon does not extend to lack of the mortise. A halted joint is formed at a 90-degree angle, creating an orderly, stable appearance that compliments certain furniture styles. 

Through Style

A through joint is the same as a ceased joint, but with one exception: the tenon reaches the other side of the mortise. Through articulations are frequently present in products which may have rough-hewn aesthetic, or an aesthetic that illustrates the elements of woodworking, such as playground units, tree houses, and garden furniture. Due to their high strength, they are also utilized in utilitarian products.

Perspective Design

As the name suggests, an angle joint is placed at an viewpoint – a feature that means it is popular for leg adjustments and structural supports in furniture. Depending on the application, tenoning machines point of view the tenon to fit inside a straight mortise, or a straight tenon is to fit inside an angled mortise. A great angle joint is commonly created as a stopped joint, and is typically directed at less than 95 degrees.

Shoulder Style

A shoulder joint has a shoulder that sits around the tenon, giving the joint a seamless appearance. Reducing the width and thickness of the tenon creates the shoulder, which rests flat up against the mortise piece. Because shoulder articulations are being used when obvious joint parts are undesirable, they are generally applied in the form of stopped joints. Furniture making is the most frequent application for shoulder joints.

Choosing the Right Machinery

A mortise and tenon joint can be produced with several kinds of machinery, including jigs, real wood boring machines, and desk saws. Technically, a lure or a table observed is employed to create the tenon, and a monotonous machine – or a drill with an unteresting bit attached – can be used to create the mortise. Machines that incorporate both functions in the same model are also available, and are well suited for high production environments, or conditions with limited floor space.